Home Decorations & Ornaments STL Download - Monstera Coastersby Nathan Simard

Magnetic (or not, depending how you want to build it) coasters inspired by a monstera plant, including main and secondary stems of different lengths and 2 different leaf designs in 2 sizes each. You can use the pot with or without legs. Since the stems are mounted on spheres and with the various leaf/stem options, you have a wide range of different configurations to make your "plant" unique. However, when the stem configuration suits you, I strongly recommend gluing the main stems to the support and the secondary stems to the main stems. Since the assemblies are spherical, the weight of the leaves tends to pull down the stems.I also recommand to put weight inside the pot to improve the stability of the design.I truly recommend buying magnets from amazon (round magnets diameter 6mm by 3mm thickness) to install the leaves to the stems. However, I added a cylinder .stl to connect the leaves without magnets. This cylinder should be glued to the stems. Depending on the precision of your 3D printer, you might need to modify the scale. For me, a diameter of 6.2mm works perfectly.3D printing. For best results, I recommend printing the stems on their flat sides and using tree supports. They are easier to remove.Don't be shy, use different PLA colors to make it more lively !