Monstera coasters

There are 7 unique leaves, each of which can be tilted slightly so that they don't just lie flat when attached to the stems. To attach the leaves to the stems, use 5x3mm magnets and glue them in place. Make sure the magnets are oriented correctly. I designed the monstera as something that could be a nice decoration and also be functional. So the holder is designed to be versatile and can be used with different planters, not just my own design. As long as the inner diameter at the top is about 140mm it should work fine. When fully assembled, fill the planter with some sort of filler, I used small stones. This will help with stability and just looks good. Make sure the magnets in the leaves all are oriented the same way! Additional materials: 28 5x3mm round magnets Filler material Print Settings: 0.2 layer height infill 15%, All Leaves 10% No support Total printing time for all parts: approx. 22h Filament needed: ~ 340 g Spring Leaf PLA ~ 290 g White PLA ~ 60 g Peach Fuzz PLA