Monstera leaf hurforge

My first hueforge print :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used:PLA Black Transmission Distance: 0.3PLA Leaf Green Transmission Distance: 2.5PLA Light Gray Transmission Distance: 3PLA White Transmission Distance: 6 Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Leaf GreenAt layer #10 (0.88mm) swap to Light GrayAt layer #12 (1.04mm) swap to White for the rest. Tips and tricks:Don't adjust the Z scaling on any hueforge, it will mess with the coloring and your hueforge will not come out as intended. You can change the X and Y to scale the picture but change them by the same percentage.To get an accurate print as shown in the photos use the same filaments listed above. You can use different brands but keep the filament colors the same. What you see in the slicer will not be how the final results will look! Hueforge takes advantage of color bleed to make the blended colors!