Slicer Discord
Moon Lamp – 3D-Druckmodell von MakerWorld MakerWorld
Decor

Moon Lamp

von part0 · Decor
1.2k Downloads
247 Likes
213 Makes
Zum Modell
Make a DIY Moonlamp with this stl. Simply add a thin lightbulb to light it up. the hole in the bottom should fit an e14 socket.find full instructions here: https://daniel-strohbach.de/diy-mondlampe Layer Height: 0.2 mmTop/Bottom Pattern: ConcentricBottom Pattern Initial Layer: LinesInfill: 100%Support Placement: Touching BuildplateSupport Overhang: 80°Support Pattern: TrianglesSupport Z Distance: 0.3 mmSupport X/Y Distance: 1 mmEnable Support Interface: YesBuild Plate Adhesion Type: RaftRaft Air Gap: 0.3 mmInitial Layer Z Overlap: 0.1 mmRaft Top Layers: 3
Kategorie
Decor
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
großer Druck
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 2/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
200 mm (Groß)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen