Moon night light base

This is a two part LED lamp base for the moon lamp: https://www.thingiverse.com/thing:2955930

Bill of materials:
1x Moon lamp printed from https://www.thingiverse.com/thing:2955930 with an opening on its bottom
1x Arduino Nano v3
1x WS2812B LED
1x 10k resistor
1x circular push button with 9mm threading, counter screwable
Some wire to connect the components
Heat shrink tube if you feel extra fancy
Double sided tape
Super glue
Arduino IDE with FastLED library

Print the Moon lamp with a small opening on its bottom.
Print both the bottom and the top part of this moon light base.
There are two openings in the top part: an opening of the mini USB plug powering the Arduino and the LED and an opening for the circular push button on the other side.
Mount the push button in the top part, solder to meet specifications in the schematic including the 10k resisistor (wrap the resistor in shrink tube).
Solder wires to the LED and connect to Arduino.
Let LED look out of the circul