Moon Star Lantern

A little celestial magic to light the night! I used a battery-operated puck light that has a remote that changes colors. Painted 3MF included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results. The cylinder in the 3mf for the light space is set to 65mm - Change as needed for your light. There is an STL included - The light space is set to 62mm - If you need one without the light space, it can be saved from the 3mf. Those using a single color printer, you can pause the print at the layer just after it finishes the outline of the design, which shows layer four in the image that I posted, or you can just print it one color and achieve the look like the image of the white lantern. Printing Recommendations: Bridge Direction: 45 degrees - This is to help with the underside of the lantern top. Initial layer and initial fill: 25 - 50 mm/s Layer Height: 0.16 - 0.20 mm Walls