Moonbreon Hueforge

Umbreon or Moonbreon from PTCG has turned into a Hueforge! This is one of my first big multicolor projects I did. I am hoping to start making at least one a week going forward. If you have any suggestions on what I should try, shoot me a message! Like, follow, boost and all that good jazz. Check out Lyanripe.com for any physical copies.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Grass Green Transmission Distance: 2 PLA BambuLab Basic Cyan Transmission Distance: 5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA White Transmission Distance: 3.5This print uses 7 unique filamentsSwap Instructions: Start with Black At l