Moonlander to Tripod

This lets you connect your Moonlander keyboard to a standard tripod mount (1/4"). The threads are modeled and they worked fine for me printed on a Prusa i3 MK3S in PETG.

I have the holes 19.5mm apart. This doesn't seem quite right; it's hard to get all 4 screws in, but I don't have the measuring tools to accurately measure this. I'd recommend not using this model, honestly. This is only here because people have asked, and it's enough to get started and refine later if you really need to put more than 2 screws in.

I used M2.5 screws. Some other things on Thingiverse recommend M2.6 screws. I have never seen such a screw and found M2.5 to be perfect. Your mileage may vary.