Mor-Go-single-print Upload

This is a two-part, 3D-printable ROV thruster design, indended to print on hobbyist-grade fused-filament printers. The name, a silly pun, is a combination of Creators name (Morgan) and the name of the guy who made the previous version (Godø).

The two pieces will come out slightly stuck together but they have less chance of peeling and warping that way and they're easy to separate from the top with a knife after the print is done. For deep water use, we recommended printing at 100% infill.

The two parts can be assembled with a nut and a bolt, 1/4"-28 x 1" long.

It has a concave bottom to provide for mounting onto the 4" OD aluminum tube that the Seeker ROV uses.