Thingiverse
Mori Lithophane
por wtrssn
5
Descargas
6
Likes
0
Makes
Lithophane of Mori
... my unforgettable cat.
In her memory.
2005 - 2018
https://youtu.be/a1zi8Qqi6Kg
**Note : ** Printed vertically in PLA of Manufacturer BQ in White at 215ºC, with lacquer and to improve adhesion to the bed use RAFT in hot bed of 60ºC and printing speed 40 or 30 mm/s
** VERY IMPORTANT WARNING **: you must modify in CURA the wall thickness parameters as seen in the photo, and you must also add the parameter ** Horizontal Expansion "which by default does not appear, and give it the value of between 0.3 and 0.5mm, depending on the printer's precision, print with 100% filling.
... my unforgettable cat.
In her memory.
2005 - 2018
https://youtu.be/a1zi8Qqi6Kg
**Note : ** Printed vertically in PLA of Manufacturer BQ in White at 215ºC, with lacquer and to improve adhesion to the bed use RAFT in hot bed of 60ºC and printing speed 40 or 30 mm/s
** VERY IMPORTANT WARNING **: you must modify in CURA the wall thickness parameters as seen in the photo, and you must also add the parameter ** Horizontal Expansion "which by default does not appear, and give it the value of between 0.3 and 0.5mm, depending on the printer's precision, print with 100% filling.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
