Morphite X155 camera mount

This is a camera holder designed to fit into the camera slots of the Armattan X155 Morphite FPV cage.
The holder is designed for cheap 15x15mm CCTV cameras such as the Aomway HD mini 600TVL or the Eachine 700TVL.
Make sure to pick the right file for printing because some cameras have their wires come out at the bottom whereas others exit sideways. There is also room for the microphone if your camera has one.

When built in the FPV cage it fits snuggly, but you will still be able to adjust the tilt angle of the camera.


How to make:
- Print the correct mount
- Remove the plastic tube from which the wires exit the camera, be careful not to damage the wiring.
- Remove lens and install the camera inside the mount.
- Fixate the lens with two drops of hotglue on either side of the camera.
- Mount the lens and adjust focus.

The original OpenSCAD files are provided to allow for customisation.