Slicer Discord
Moses (beta) – 3D-Druckmodell von Thingiverse Thingiverse

Moses (beta)

von jerry7171
38 Downloads
35 Likes
0 Makes
Zum Modell
I recently purchased a 24 megapixel Sony Alpha 5100. It is a massive leap in terms of resolution and much lighter than the last DSLR I had been using. I also purchased several adapters and various lenses like the Jupiter 3, the Industar and a Helios. While they are Soviet-era glass, they have proven to be ever bit as good as any Zeiss glass and far more affordable. They are manual focus only, which is why this Moses is currently a beta.

I set up my camera on a tripod, focused and slowly and thoughtfully took over 300+ photos over two days with deeply overcast skies. The display photo was taken a short time afterwards as the skies broke.

My method of choice is to now run all the RAW photos through Photomatix Pro to create HDR photos, but at a sensible and conservative level without being garish. I then double check the results from photo to photo to make sure they're all evenly lit and exposed to improve my chances of success with Photoscan Pro.

I then place all the resulting P
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Mittlere Konfidenz
Warum?
Supports nötig · großer Druck
Einteilig Supports nötig
Supports 2/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 2/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
200 mm (Groß)
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

jerry7171 veröffentlicht auch auf

4 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Häufig gestellte Fragen
Welcher 3D-Drucker eignet sich für Moses (beta)?
Jeder FDM-Drucker sollte mit Moses (beta) gut zurechtkommen. Bewährt hat es sich u. a. auf Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. Ein Mindest-Bauraum von 200 mm wird empfohlen.
Benötigt Moses (beta) Stützstrukturen beim Drucken?
Ja, Moses (beta) braucht wahrscheinlich Stützen für die Überhänge. Baum-Supports lassen sich danach am einfachsten entfernen.
In welchem Dateiformat ist Moses (beta) verfügbar?
Moses (beta) ist im Format STL verfügbar. Diese Dateien können mit kostenloser Software wie Cura, PrusaSlicer, Bambu Studio oder OrcaSlicer für FDM-Druck geöffnet und gesliced werden — oder mit ChiTuBox und Lychee Slicer für Resin-Druck. Der Download wird über Thingiverse bereitgestellt.
Ist Moses (beta) kostenlos herunterladbar?
Ja, Moses (beta) ist als kostenloser Download über Thingiverse verfügbar. Prüfe die Lizenz auf der Originalplattform, um kommerzielle Nutzung, Remix und Namensnennung zu verstehen.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen