Motorcycle 5 Colour Hueforge

Motorcycle Hueforge I printed this on an Anycubic Kobra S1 with 2 AMS units, if you don't have an AMS unit then set the colour changes as a pause and change colours manually. If you are going to change the size of the print then do not adjust the Z axis HueForge Instructions The Model is 112x200mm in size Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mm  The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm   *** This print uses 5 colours *** Filaments Used: PLA Anycubic Black PLA BambuLab Basic Blue Gray  PLA Anycubic Texture Grey PLA Anycubic Classic Green PLA Anycubic White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Grey At layer #18 (1.52mm) swap to Green At layer #25 (2.08mm) swap to White for the rest.