Thingiverse
Mount case for IR camera with lights
par Yoonpyo
90
Téléchargements
43
Likes
0
Makes
This camera case can be used with [Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2](https://www.thingiverse.com/thing:3114849) by [sneaks](https://www.thingiverse.com/sneaks/about). If you are interested in setting up a webcam on your 3D Printer, please go check it out. The design is very well thought out and worked wonderfully for me.
### Used Components:
- [IR Camera for Raspberry pi](https://www.aliexpress.com/item/32820804845.html?spm=a2g0s.9042311.0.0.3d9c4c4dSzs48l)
- [2020 Extrusion mount](https://www.thingiverse.com/thing:3114849/files) (2020_standard.STL) by [sneaks](https://www.thingiverse.com/sneaks/about)
- Two M2.5*10 screws
- Four screws provided with the camera (Approx dimensions _ d=1.95mm, dk=3.6mm, L=5mm, k=1.1mm)
### Assembly:
1. **Make sure you connect the ribbon cable to the camera module first.** It is very difficult to connect (or disconnect) ribbon cable once you put the camera and case together.
2. Pull the ribbon cable through the sl
### Used Components:
- [IR Camera for Raspberry pi](https://www.aliexpress.com/item/32820804845.html?spm=a2g0s.9042311.0.0.3d9c4c4dSzs48l)
- [2020 Extrusion mount](https://www.thingiverse.com/thing:3114849/files) (2020_standard.STL) by [sneaks](https://www.thingiverse.com/sneaks/about)
- Two M2.5*10 screws
- Four screws provided with the camera (Approx dimensions _ d=1.95mm, dk=3.6mm, L=5mm, k=1.1mm)
### Assembly:
1. **Make sure you connect the ribbon cable to the camera module first.** It is very difficult to connect (or disconnect) ribbon cable once you put the camera and case together.
2. Pull the ribbon cable through the sl
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
