Mount for skinned Logitec C270 camera

Print and add a piece of 3M double-sided foam tape to the inside, then stick the camera to the tape. Cable goes through the hole in the back.

The ground wire will need to be de-soldered and then re-soldered to the board.

Slots in the back are for a small zip-tie to pass through. The zip-tie is to hold the cable to provide strain relief.

We use the little nub in the back is to help secure the camera mount to a second printed mount designed for whatever we're mounting the camera to. We design a matching divot into this piece to help align the camera. The two pieces are held together with superglue.