Thingiverse
Mountable case for XPJ-16A PSU PCB
par CallMeRive
3
Téléchargements
1
Likes
0
Makes
A case for the XPJ-16A power supply unit board from AliExpress (12V 3A, https://aliexpress.com/item/33022919004.html). Might fit XPJ-02C and other boards of similar size.
Supposed to be mounted underneath a surface - under a shelf or a desk. When mounted properly (underneath something, technically upside down compared how it's shown on the photos) it's supposed to be a little bit splash resistant, as I designed it for my plants' LED lights.
The PCB is mounted with 2x6 mm screws (or 2.5x6 mm).
The lid is attached with 2.5x10 mm screws.
The IEC 60320 C8 receptacle is mounted with 3 mm bolts and nuts (11-15 mm in length).
Supposed to be mounted underneath a surface - under a shelf or a desk. When mounted properly (underneath something, technically upside down compared how it's shown on the photos) it's supposed to be a little bit splash resistant, as I designed it for my plants' LED lights.
The PCB is mounted with 2x6 mm screws (or 2.5x6 mm).
The lid is attached with 2.5x10 mm screws.
The IEC 60320 C8 receptacle is mounted with 3 mm bolts and nuts (11-15 mm in length).
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !