Mounting Bracket for Pneumatic Valve

This simple model is a mounting bracket designed to securely hold a pneumatic valve. It allows the valve to be attached to a surface—such as a wooden or metal plate—using a standard 3mm wood screw (a machine screw schould work too).Background & Use Case:The valve is controlled by my Ruida laser controller, connected to the Status output and powered by 24V. It activates automatically whenever a laser job starts, regardless of whether the machine is cutting or engraving. This makes it a key part of my Ultimate Air Assist setup, managing the main airflow to the laser head.For pressure control during engraving or cutting, a separate 5/2-way valve with flow restrictors is used. This second valve is connected to the Wind output of the Ruida controller. After the restrictors, both outputs of the 5/2 valve are merged using a Y-fitting, which leads to a single pneumatic line going to the laser head.Upstream of the main valve, I’ve also installed a manual shut-off valve and a pressure regulator,