Thingiverse

Mounting Brackets for CanaKit Raspberry Pi 4 Case

by Eerolin

1 Downloads

2 Likes

0 Makes

Two mounting brackets for the CanaKit Raspberry Pi 4 case, designed for 4040 aluminum rails (Ender 3 series). I preferred to mount the black CanaKit case without having to print an additional holder case.

Brackets are 5.720mm thick and fit very securely onto aluminum slots. Attached to the CanaKit bottom piece using two M4 screws (see second photo). Screw holes are 3mm in diameter to allow threading.

Note: The 16mm M4 screws I used were slightly long; 8-10mm screws are recommended.

Prints in under 2 hours without supports.

brackets canakit Ender 3 Pro holder mounting bracket raspberry pi 4

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Mounting Brackets for CanaKit Raspberry Pi 4 Case need supports when printing?

No supports needed for Mounting Brackets for CanaKit Raspberry Pi 4 Case — it's designed to print clean off the bed.

How long does it take to print Mounting Brackets for CanaKit Raspberry Pi 4 Case?

According to the design notes, Mounting Brackets for CanaKit Raspberry Pi 4 Case takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Mounting Brackets for CanaKit Raspberry Pi 4 Case available in?

Mounting Brackets for CanaKit Raspberry Pi 4 Case is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Mounting Brackets for CanaKit Raspberry Pi 4 Case free to download?

Yes, Mounting Brackets for CanaKit Raspberry Pi 4 Case is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Mounting Brackets for CanaKit Raspberry Pi 4 Case

Add to Collection