Thingiverse
Mounting plate for Duet2
door cosmowave
4
Downloads
0
Likes
0
Makes
This is a mounting plate for a Duet2 Ethernet/WiFi.
It consists of 3 different Parts: the mounting plate, a holder for the CPU cooler with possibility to routing cables, and the distances for mounting the holder (3x needed)
The cooling fan for the CPU which is mounted on "Grundplatte_Halter" is allways a 40x40mm radial fan
There are 3 options for stepper driver cooling fans.
- "Grundplatte_40Fan": also a 40x40mm fan
- "Grundplatte_4010TurboFan": a flat mounted 4010 Turbofan for stepper drivers
- "Grundplatte_5015TurboFan": uses a 5015 Turbofan for stepper drivers
The holes for the threads are smaller as needed. You can drill them with 2.5mm and cut a M3 thread.
It consists of 3 different Parts: the mounting plate, a holder for the CPU cooler with possibility to routing cables, and the distances for mounting the holder (3x needed)
The cooling fan for the CPU which is mounted on "Grundplatte_Halter" is allways a 40x40mm radial fan
There are 3 options for stepper driver cooling fans.
- "Grundplatte_40Fan": also a 40x40mm fan
- "Grundplatte_4010TurboFan": a flat mounted 4010 Turbofan for stepper drivers
- "Grundplatte_5015TurboFan": uses a 5015 Turbofan for stepper drivers
The holes for the threads are smaller as needed. You can drill them with 2.5mm and cut a M3 thread.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!