Mounts for Minimum Radius PTFE Tube Guide

Two types of mounts are included to clip the Minimum Radius PTFE Tube Guide to. Both version use a thicker version of the connector to prevent stretching/creep over time. Don't use the clips provided with the MinRadius Tube Guide 3mf file.One mount that is compatible with both the original AMS and AMS Pro to maintain the angle of the tube coming out of the AMS units. It leaves room to press the release button on the AMS Pro units.One general mount that holds the Tube Guide parallel to whatever surface it is attached to. 3 different versions: 9mm height (for the back of the X1C), 15mm height, and 20mm height.They attach with mounting tape that is 10mm wide and 1.1mm thick. I also made a crossbrace to prevent the Tube Guides from catching as you pull the drawers out. If you're interested in the Slide Out Base, it's under the original BaBo drawer stacker as a print profile at the bottom.