mouse cable bungie

the model is a cable bungie, that is something to get the cable out of the way of your mouse, i find it it helps with everything from working to gaming. printing: when i printed it i used 100% infill and it worked great, play around with different infills but i recommend 100% on the spring and beams. the model is designed for a 0.4mm tip but different sizes should work, they might just be a bit off 1: now assembly, the tolerances are exact as the joins need to be tight so feel free to file down things that dont fit together, just dont file them too much or it will become wobbly. 2: the two beams should be joined with the base in the square holes leaning towards the back (put this on first)3: the little box will be slid in to its dovetails with the opening facing the front. but before you put it on be sure to put 1 section of the spring in the opening of the box (with the other end of the spring through the top of the beams), then slide it on. 4: the clips on the spring should be facing