Mouse Mover

Simple mouse mover - made with Arduino nano and SG90 servo. Arm moves every 2 min. Pretty straightforward print and build. Program below. Use and old phone charger with USB to power Nano. Can use computer USB to power mover.


/*
/ Mouse Mover Program
/ Servo connected to pin 7
/ My arm was not straight at 90 deg, adjusted angles to compensate
/ Mouse moves every 2 min. Change delay to change mouse move time
*/

#include

int servoPin = 7;

Servo servo;

int angle = 90; // servo position in degrees

void setup()
{
Serial.begin(9600);
servo.attach(servoPin);
Serial.println("Hello");
}


void loop()
{
// move arm
for(angle = 79; angle < 88; angle++)
{
servo.write(angle);
Serial.println("Hello");
delay(30);

}
delay(120000);
// now arm back
for(angle = 88; angle > 79; angle--)
{
se