Moving Model A1 Calendar

Tired of boring old calendar designs? Well, this isn't just a 3d printed calendar, it's a 3d printer calendar! Sliding gantry, Z axis, and bed let you move the toolhead to any point on the build plate to indicate the day. When the month changes, simply swap to a different plate. I hope you enjoy this low-poly recreation of the A1. Assembly is simple. First, remove the supports and deburr any sharp edges. Then, slide the bed into the slot on the base, using tape to shim the slider as necessary. Slide the toolhead onto the gantry, again shimming if needed. Insert the gantry's sliders into the corresponding track on the Z axis, and once again use tape to shim the sliding mechanism if you desire a tighter fit. FInally, press the Z axis into the slots on the base, and secure with a drop or two of CA glue if desired. From there, it's as simple as attaching a build plate with some double sided tape, and moving the toolhead to today's date :).