Moving Raspberry Camera

This collection is for a Rasp Camera mounted to the Z-Axis that it can move up as well (helpful if you print higher parts).

In my special case with my Anycubic Mega-S and installed LED-Strip-Holder around the frame i had to create an own holder and a cable guide for the left frame.

UPDATE: i made the screw hole a little smaller that a M3-Screw really fits.
And i made the "gripping" part of the cable guide and holder a little longer.

**Camera Box**
This is a remix of https://www.thingiverse.com/thing:3121052

I modified the parts a little and removed the letters from the back and the ball-handle from the front.
Instead i placed a small part where a M3 screw will go in for the Z-Axis Holder.

**The Holder**
I changed the holder itself as i have LED-Strip-Holders everywhere and the cam-holder must go around them.
I was inspired from this one: https://www.thingiverse.com/thing:4286454

This part is screwed with 2 M3x8 with M3 Nuts and Washers to the left Z-Axis cabinet.