MP Select Mini Bed Chain Drag Mounts

NOTICE: The snap in tabs on the back panel connector were not working as well as I had hoped, so I removed them in this latest revision.

Revision 2: I have added a side mount design that works with 4th Dimension Modifications' Enhanced Side Panels.

After having to return my MP Select Mini once under warranty because the way the bed power and thermistor lines were routed cause the wiring to break and fail, I decided to reroute the wiring and add a chain drag to protect the cables.

There are two versions of the design; one with a housing for a Molex connector and another without. The main hole is 3/8" and the side holes are 9/64". You'll need to locate the back panel mount directly under the bed mount for best results.

You need 2 M3 x 6 mm bolts and 2 M3 nuts to secure the back panel mounts. You will also need 2 M3 x 10 mm bolts to replace the stock bolts if you have the original MP mounting brackets or 2 M3 x 6 mm if you have the new style bed rail mounts.

Amazon source