Thingiverse
MPCNC 4040 mid span supports
by robbertkl
117
Downloads
78
Likes
1
Makes
Mid span supports for a long axis MPCNC (Mostly Printed CNC by Allted) mounted on a frame built from 4040 aluminium extrusions. It complements the [MPCNC 4040 frame mount](https://www.thingiverse.com/thing:3036995) corner pieces. STEP files are included for easy customization.
It comes in high and low versions, meant for either your X or Y axis. It was designed for the international 25mm "F" version of the MPCNC.
The tabs on the bottom slide into the rails of the extrusions, keeping it in place. Between the tabs is an exact space for an M4 slide nut. Just like the `Frame_Corner` and `FrameR_Corner` pieces, both `Frame_SupportX` and `Frame_SupportY` needs an M4x35 bolt to screw through the part and into the slide nut. However, bolting it down is completely **optional**! You can decide to just put them on the frame and the weight of the conduit will keep them in place. This way you can also slide it to the side if you need to load a long workpiece. Need a permanent position? Just b
It comes in high and low versions, meant for either your X or Y axis. It was designed for the international 25mm "F" version of the MPCNC.
The tabs on the bottom slide into the rails of the extrusions, keeping it in place. Between the tabs is an exact space for an M4 slide nut. Just like the `Frame_Corner` and `FrameR_Corner` pieces, both `Frame_SupportX` and `Frame_SupportY` needs an M4x35 bolt to screw through the part and into the slide nut. However, bolting it down is completely **optional**! You can decide to just put them on the frame and the weight of the conduit will keep them in place. This way you can also slide it to the side if you need to load a long workpiece. Need a permanent position? Just b
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
