MPCNC Cam Hold down

Whenever I used a hold down for my MPCNC, i had to worry about the top of the hold down getting in the way of the gantry assembly and the router.

Figured there was no reason to press down on the project, main concern should be lateral shift,

I printed this at 20% infill with 3d honeycomb, PLA... no supports necessary

My spoil board has 1/4-20 T nuts, I used 1/4-20 bolts, 1" long

Total tool height is 18mm if you use the knob with the grip, 12mm without the grip