MPCNC Filament Spool feed system

I needed something for my large bed MPCNC to hold my filament spool and keep the filament feed lines out of the way during the print.I designed this system to hold a 5mm Teflon filament guide tube. It will hold most spools I am sure. It will fit a stock MPCNC, but should have no trouble being adapted as you see fit.This design sources parts from other sources as noted. I have included all the files needed here, so you can get them in one place. The parts have color references based on my pictures. There are other EMT cap styles available from the Remix link.Print SettingsPrinter Brand:MakerGearPrinter: M2Rafts:Doesn't MatterSupports: YesResolution:.25mm layersInfill: 50%Notes:You will probably need supports for the large funnel parts, but not the other stuff.You need to print 4 caps, 4 centers, and 1 each of the remaining partsPost-PrintingAssemblyYou will need eight #6x3" and five #6x1" machine bolts with matching lock nuts. On my machine I used a 20" EMT tube for the upright pole and