Thingiverse
MPCNC Primo 65mm Spindle mount
par Bobbond000
4
Téléchargements
2
Likes
0
Makes
I've updated my 65mm spindle mounts for the Primo version of the MPCNC. There are 2 mount types included as I've come across some differences between my 2 spindles.
Both use the same top mount, the top outer ring is also set up to accept my air nozzle when it is finished.
Lower mount, some spindles have slightly different end designs that required making different mounts, so I included both styles. The 800W ring needs to be printed with supports
On my machines, this puts the collet even with the bottom of the MPCNC mount.
.3mf files are included as there were mesh errors with the stl files.
Both use the same top mount, the top outer ring is also set up to accept my air nozzle when it is finished.
Lower mount, some spindles have slightly different end designs that required making different mounts, so I included both styles. The 800W ring needs to be printed with supports
On my machines, this puts the collet even with the bottom of the MPCNC mount.
.3mf files are included as there were mesh errors with the stl files.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
