MPCNC PRIMO Inductive Switch Mount/Support (auto squaring)

**STANDARD PRIMO and ALU PROFILE FRAME 30x30**

I have designed a support for using inductive switches with the MPCNC PRIMO.
These parts can be used for the standard PRIMO with legs (pipes 25mm) but also Alu-Profiles (Frame) 30x30mm.

The support was designed with the following requirements:

* The inductive switches will be used instead of the end stoppers
* … but mostly these switches will be used for auto-squaring
* I wanted to design a support/mount that can be used for start/end so that every truck needs only 1 switch.

Here is Version 1.0 of the Inductive Switch Support including a couple of parts. The mount is designed for 12mm inductive switches. In my case I am using NPN NO (normally open): LJ12 A3-4-Z/BX - 6V - 36V DC.

In addition to the printed parts I have used “rivet nuts” to get high quality threads within the parts.

The rivet nuts will be implemented in the parts using a soldering iron. Heating it up you can melt-in the nut and you will get a nice and s