MPI7001 7" Touch Screen Case

This is a screen case for the "7inch HDMI Display-B" with USB capacitive touch, Model number MPI7001. The screen is available on amazon at the following link:

https://www.amazon.com/gp/product/B07N1P5YWR/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

The case has cutout holes for the cable connections, and an access hole on the back for the backlight switch. There is also a small groove on the bottom of the case which interfaces a small tablet stand I have.

Print the front piece with the front face down, supports for the cable connection holes. Print the back piece with the rear face down, no supports.

The back cover is held on by four flat head screws, M3x20mm, and four M3 heat-set threaded inserts. These items can be sourced from McMaster-Carr at the following links, respectively:

M3x20mm Flat Head, 18-8 Stainless - https://www.mcmaster.com/92125A136/
M3 Heat-Set Threaded Insert - https://www.mcmaster.com/94459A130/

Print, install the threaded inserts, and assemb