MPMD Magnetic Enclosure Frame

Updates:
31/12/2020
I was having a few poor prints and was noticing that the slot that holds the door material can be weak due to its thickness and and the orientation of the layers of filament. In order to help with this I increased the thickness of this area.
I have uploaded the new version and removed the older version.

30/12/2020
I realized that my pieces were slightly small and were quite loose fitting within the MPMD opening. I believe that I may have done this originally, since the two pieces when fastened together do tend to be a little wider than when printed together. I decided to fix this problem and make the pieces the exact size. If they are tight in your setup or due to your printer's calibration the parts can be scaled in the slicer or the edges filed down.
I have printed and tested the parts and they appear to fit better than the original parts so I have gone ahead and removed all the old parts.
I have left the glue-on stops, in case you have the older parts a