MPU6050 calibration case

This is calibration case for the MPU6050 module. It enables you to place the module on each of 6 sides to take out the readings and then calculate the calibration values.

Use M2 screws (I used this: https://www.aliexpress.com/item/1005007400528141.html)

If you soldered perpendicular goldpins to your MPU6050, you can screw it upside down to the case.

Designed in Onshape: [my project](https://cad.onshape.com/documents/22d9f68cbcbd2bf6da3124d3/w/53f67956bab83e583d64f874/e/c9c5ee5637de4cb9c683bf91?renderMode=0&uiState=67b37a7cddaeb2340fb606b3)