MS-A2 10" / 19" Modular Rackmount (V2)

V2 NOW AVAILABLE - Added as a separate print profile, make sure to select the right one This model is inspired by the amazing idea of https://www.printables.com/model/1272034-minisforum-ms-01-19-rackmount This is my take on the approach, with a model designed completely from scratch making all the changes I wish the original one had to accommodate my needs. This is a modular system, you can print the parts to mount on a 10" rack or a 19" rack. More parts can and will be made available over time to attach together on the side. The cable routing is not the best, I am open for suggestions on how to improve, but for now that is plenty of room to route the cables on the bottom of the case using a 1-3 fan header splitter. I am also using a USB adapter to plug the fans to the back of the unit but you might be able to plug them in the internal header with some other adapter too (I did not check on that, do at your own risk). V2 NOW AVAILABLE!!! ATTENTION !!! - V1 parts are NOT compatib