MTB Hueforge Photo

Project: MTB 2.0Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA SunLu Black Transmission Distance: 0.3 PLA SunLu Basic Blue Gray Transmission Distance: 3 PLA SunLu Grey Transmission Distance: 1 PLA SunLu White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Blue Gray At layer #15 (1.28mm) swap to Grey At layer #18 (1.52mm) swap to White for the rest.