Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Hobby&DIY / MTB/VTT Handguards
MTB/VTT Handguards – 3D printable model from MakerOnline MakerOnline
Hobby&DIY

MTB/VTT Handguards

by Mostly2D · Hobby&DIY
6 Downloads
4 Likes
0 Makes
Go to Model
The printing orientation is the one given in the file. I recommend using PETG OR PA-CF for printing. Please note that the red markings shown in the photos were made with glue; they are not included in the base file. Requires: Two M5 screw-in inserts ( heat inserts) Two M4 screw-in inserts (heat inserts) Two M4x25 screws Two M5x14 screws
Category
Hobby&DIY
Source
MakerOnline
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
significant post-processing
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
PETG, Carbon Fiber
Post-processing
Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Mostly2D also publishes on

10 additional models across 1 more platforms

Printables
10 models
♥ 82 ↓ 1,065 ⚒ 3
Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Print in place BALL bearings
Print in place BALL bearings
by Jerryie
↓ 4.2k ♥ 1.3k
Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017
Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017
by Jerryie
↓ 4.2k ♥ 1.6k
Phone stand- multiple versions
Phone stand- multiple versions
by DGA
↓ 4k ♥ 791
Kobra S1 Fan duct optimised
Kobra S1 Fan duct optimised
by rozsmix1
↓ 4k ♥ 935
Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017
Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017
by Jerryie
↓ 4k ♥ 1.6k
Print in place BALL bearings
Print in place BALL bearings
by Jerryie
↓ 4k ♥ 1.3k
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection