MTG Commander Deck Box v2

UpdateThere is a bigger version of this box with adjusted tolerances now! (As many comments suggested)You will get the more spacious version if you print every stl with a "+".I'd recommend printing the + version if you intend to double sleeve your deck or use thick sleeves. In case you are insure which to print you can just measure the thickness of your deck and compare it with these values:MTG Commander Deck Box v2 storage depth: 54mmMTG Commander Deck Box v2+ storage depth: 75mm AssemblyThe parts will be referred to as follows: Lid assembly instructions Lay the “lid surface” flat on a table and slide the “lid top plate” onto it. The flat side of the plate must face upwards.Next, put the “lid locking plate” on top. If the fit is too tight and you can't rotate it easily, use a file to widen the hole of the locking plate.Not its time to put the six “lid locking bolts" in place. They are symmetrical, direction does not matter.The “lid bottom plate” is the last part. I