MTG Deck Box

The original design (with the diagonally cut sides) is designed so that you can print the same part twice and they'll fit together. The new design (with two full sides and/or the Library/Graveyard elements) has left/right sides. It's capable of holding a standard deck and sideboard. I designed it to be held together with 1/8" x 1/4" magnets.

Layer thickness probably won't matter, but I'd do 15 or 20% infill.

There are different versions of the files:
- Without "M" logo
- With "M" logo
- Without "sidemag" holes to hold it together when open
- With "sidemag" holes to hold it together when open

8/22/18 -
- I have discarded the "un-Enlarged" versions on my PC, so if you prefer those for some of the changes I'm making, let me know.

8/22/18 -
- Each version now has an "Enlarged" alternate that is 2mm larger on the inside, as I printed it out and my cards, in UltraPro sleeves, ~JUST~ fit, so I figured a little extra space would be a good ide