Mug Shelter

☢️ MUG SHELTER ☢️ For those who live in the wasteland. For you, who know that everything floating in the air is toxic. For you, who can't trust anyone or anything — because the moment you look away, someone will cough directly into your mug, a pigeon will shit in your coffee, or a dying moth will contaminate your breakfast and turn you into something that glows in the dark. You didn't ask for this life. But here you are. We can't fix the wasteland. We can't fix your coworkers, your commute, or that guy who breathes too loud. We can't undo whatever series of terrible decisions led you to this office, this desk, this existence. But we can protect your coffee. Mug Shelter. Because you've lost enough already. It won't save you. But it might save your morning. 📦 What's inside: 4 parts | Press-fit assembly | No glue needed except for logo piece Fits most standard mugs FDM printable — tested on Bambu A1 Mini 🎨 Recommended settings & colors: Body & dome: Silk PLA (titanium grey) — 0.28mm Base: Matte PLA (black) — 0.28mm Logo: Matte PLA (white) — 0.12mm 🔧 Assembly: Place the body into the base and secure with the 3 T-shaped connectors. Insert the 6 cylindrical connectors into the top of the body — use the wider ones (0.60mm) for Silk PLA, standard ones (0.25mm) for regular PLA. Press the dome onto the body using the 6 connectors. Apply a small drop of glue to the logo slot and place the logo piece. Done. Your coffee is now protected. ☢️ 🔩 Assembly notes: Two connector sizes are included: 0.25mm tolerance for PLA-to-PLA joints, and 0.60mm tolerance for PLA Silk-to-PLA joints. If you print in Silk PLA, note that the 0.60mm tolerance is only needed for vertical connectors — horizontal ones worked fine with 0.25mm in my experience. This may be due to Silk PLA expanding slightly more than standard PLA. Connectors should slide in with light pressure only. Forcing them may crack the socket and ruin the part — if it doesn't go in easily, try the wider version. The Mug Shelter lo