Thingiverse

Multi color emojis

von Rick1997

32 Downloads

28 Likes

1 Makes

I recommend you print these with a layer height of 0.2 mm with 3 (0.6 mm) top/bottom layers. The first layer is 1 mm thick, the consecutive layers are 0.6 mm. Change the filament color according to color_order.jpg at the ~end~ of layers 5, 8, 11, and 14 depending on how many colors are required. All objects have a diameter of 70 mm. The height depends on how many colors are required. When scaling make sure the height stays the same.

These files are based of [Microsoft's emoijs](https://emojipedia.org/microsoft/)

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

2 Farben

Einteilig 2 Farben / AMS

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Farben

2 (AMS/MMU empfohlen)

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Multi color emojis

Ähnliche Modelle

Zur Sammlung hinzufügen