Multi-colored badges based on multi-colored filaments (no AMS required)

必须使用多色耗材才有效推荐对打印面板涂抹胶水，打印完美的首层对最终效果非常重要。通过在切片软件中使用修改器功能实现，原始模型来自makerlad的钥匙扣生成器示例，但是我无法找到此模型的具体模型链接，无法填写二次创作中的模型来源选项，目前只能以原创发布，如果任何人能够提供此链接，我会进行更改推荐使用0.2mm喷嘴进行打印。0.4mm同样可用，且对比度更高，但是会失去一些细节Multi-colored filaments must be used to be effectiveIt is recommended to apply glue to the printing panel, and the perfect first layer is very important for the final result.Achieved by using the modifier function in the slicing software, The original model is from MakerLad's keychain generator example, but I can't find a specific model link for this model, I can't fill in the model source option in the secondary creation, it can only be published as original at the moment, if anyone can provide this link, I will make changesIt is recommended to print with a 0.2mm nozzle. 0.4mm is also usable and has a higher contrast ratio, but some detail is lost