Thingiverse
Multi Drawer Organizer (Stackable)
von TriDeeDesign
73
Downloads
151
Likes
2
Makes
This is Multi drawers component / Bolts organizer, useful to store small components and to organize screws and bolts storage.
To print and assembly you will need:
Print:
- 2 x Side Supports.
- 3 x Shelves.
- 1 x Top Lid.
- 9 x Drawers.
Assembly:
- you will need 16 Piese of M3 x 12 mm (M3x10 mm can fit as well).
The drawers inner dimensions are 48x98mm
they should slide easily if your printer is properly calibrated.
Update 03-2024: Stacking Side Support.stl
i uploaded additional side supports, so that you can stack multiple drawers on top of each other using this current design.
Just Note: its stacking on its own weight, there is no screws to connect when stacking.
To print and assembly you will need:
Print:
- 2 x Side Supports.
- 3 x Shelves.
- 1 x Top Lid.
- 9 x Drawers.
Assembly:
- you will need 16 Piese of M3 x 12 mm (M3x10 mm can fit as well).
The drawers inner dimensions are 48x98mm
they should slide easily if your printer is properly calibrated.
Update 03-2024: Stacking Side Support.stl
i uploaded additional side supports, so that you can stack multiple drawers on top of each other using this current design.
Just Note: its stacking on its own weight, there is no screws to connect when stacking.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
