Multiboard 10-Degree Angled Foot

A two-part Multiboard foot with a 10-degree angle. Designed for using a single 6 to 9 MU-height Multiboard Border tile as a freestanding desktop organizer. For my intended appication, the original Multiboard Free-Standing Foot absorbs too much space around the bottom and front of the tile. I also wanted the tile to lean back as to prevent things from falling off shelves/holders on the tile. I therefore designed this two-part foot. The back ("leg") part has four holes for using two or more 13 mm Small Thread Bolts. I recommend printing this part face down without supports. The "toe" of the foot should be printed flat. It has a Multiboard Clip at the rear, which snaps into the bottom edge of the Multiboard Tile. For attaching the leg to the back of the multiboard tile, I recommend using the 13 mm Small Thread, Small Head, Folded-Bolts for improved strength. Also, the narrow profile of this bolt head hides up nicely behind the "leg". This design is published under