Multiboard adapter for Kobra S1 Max D3P riser

MODEL This model is for a side mounted attachment for a Multiboard panel for use with the Kobra S1 Max D3P riser - Link: 🧞‍♂️ Anycubic Kobra S1 Max D3P riser・ 3MF File for 3D printing・Cults The model consists of hooks to attach to the riser and adapter to snap on the Multiboard and stand off snaps.  A pdf instruction guide is also provided.  A right and a left side shelf is included. Left and right are reference as your left or right when looking at and facing the front of the printer. Unfortunately I am not all that familiar with the Multiboard system so I suggest you look at their website https://www.multiboard.io/ if you have any questions about generating your Multiboard or obtaining components for it. Thank you 3D PRINTING PRINT SETTINGS IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing with support painted. I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings. 3D PRINT SETTINGS I use the following settings and materials to print this model: Infill % : 15% (no need for more) Nozzle diameter: 0.4 mm Layer height: 0.2 mm standard Walls: The model is set for 2 walls. Some users have reported better rigidity with 3 walls. Material: The Anycubic Kobra S1 Max has an internal heater. PETG is the preferred choice for filament as it is about the same price as PLA but will sustain higher temps without deforming. You can also print the riser using ASA or ABS but this is more challenging due to possibility of warping. If you will only be printing PLA or PETG and will not place a dryer on the riser then you can print in PLA. This suggestion applies to the entire riser and not only the base parts.  ABOUT ME   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very re