Multiboard Dual Siphon Holder

This multiboard shelf system holds two siphons - a standard diameter siphon (9.5mm/3/8") and a standard diameter autosiphon (23 mm/0.9"). Upper mount is slotted to allow easy removal of the siphon, while the bottom mount holds the siphon caps in-place. Requires 4X locking bolts (T-bolts are fine) and 4X flush snaps (either standard or moderate-weight work).

I recommend printing with the standard multiboard profile - e.g. PLA with 3 perimeters and 10-15% infill. Smoothing is not required, but does make everything look nicer.