Multiboard H2D Plate Hanger

These small screw-in hooks can be used to hang build plates for the Bambu Lab H2D printer from a multiboard tile. They also fit the cutting mat plate, and the laser cutting plate. The hangers should be spaced out with 10 hexes between them. There are two hook files, one for the left hook and one for the right. Do not try to use just one and flip it, the threads would get reversed and wouldn't fit in the multiboard. The build plates slide onto the hooks using the two innermost holes on the edge of the build plate (see the picture). They also need space to rotate outwards from the wall slightly to make it over the hooks. If you position the hooks so that the offsets put them further apart, they are spaced to hold the regular plates. If you position them so that the offsets put them closer together, they are spaced to hold the cutting mate and/or laser cutting plate. I printed mine with Bambu Lab PLA Matte (Yellow), with two walls, and 15% infill. This model was designed in OnShape, u