Multiboard mount for Peak Design Capture

Remixed adammj136 's PD capture mount to be compatible with multiboard. Changes made:- Removed top and bottom screw holes- Shaved off the back a bit to reduce thickness (to compensate for additional thickness by multiboard rail)- Attached a multiboard rail (taken from a 1x1 multibin shell)Needs a multipoint from https://www.multiboard.io/parts-library/multipoint/multipoints (a small thread multipoint is included in the plate)Print settings is standard multiboard settings:- 3 outer walls / perimeter- 15% infill- slicer default for the restRecommended printing orientation applied in the plate