Multiboard Multipoint Einhell Power X-Charger 3A

Mount your Einhell charger cleanly and invisibly to your Multiboard!Boost MeI'm new on MakerWorld, so if you like this model, feel free to give me a boost. It's free!This mounting block uses Multipoint to attach firmly and securely to your Multiboard. Here's what you need:1️⃣ 3x M3 heat set inserts (I used M3x4x4)2️⃣ 3x M3 Allen / machine screws (I used M3x8 - just make sure the head fits in the mounting holes on the charger itself!)3️⃣ 4x Multipoints (3D printed - I used these, but you can use any variant you like)Use your soldering iron or press tool to insert the heat set inserts into the 4mm holes and then screw the Allen screws in (but not all the way in)! The charger then latches on to the screws on the mounting block. Alternatively if you don't have any heat set inserts, there's a good chance you can screw a larger (M4) Allen screw directly into the holes. I haven't tried that though, so let me know how it goes if you go that route! Small note: The printe