Multiboard Ratchet Socket 1/4 inch drive

I tried out the multiboard ‘flat head’ bolts recently and quickly realized I wanted a tool to turn them since there's basically nothing to grab onto with my fingers. I didn't want a whole hand tool just for multiboard, and couldn't find an existing socket design that was ¼" drive, so I made this one using caliper measurements of my ratchet and some multiboard bolts. I added knurling along the back edge so it can be turned with your fingers easily, (or used without a ratchet at all) which is helpful because there is not usually much resistance on Multiboard bolts once they break loose. I tested fitment with all my ¼" drive ratchets, extensions, adapters, etc. and it can drive any of the full-size Multiboard octagonal bolts as well as the large T bolts. Note 1: The 3mf file includes support material inside the ratchet opening. This is optional but I wanted to make sure no bridges sagged and kept it from working well. I recommend poking this support piece out from the