Multiboard Tile Align Tool V3 Parametric (6.25mm)

This is the updated version of my multiboard tile align tool. It adopts to the recent changes off the offset snaps from 8mm to 6.25mm from the tile thickness from 6.4mm to 6.2mm.This small tool is used to align a multiboard tile to an edge. A clamp can also be used to prevent the tile from moving. Print settings:wall loops: 3 Attached is the fusion file, to adopt this aligning tool to your specific needs. The following parameter can be changed:distance to the aligning edgelength of the support (Support_length)width of the support (Support_width)height of the stopping edge (stop_height) Change the paramter:Open the f3d-file with fusion360open modify → change parameterchange the values under “expression” Limitations:Distance: ≥ 0.6mmSupport_length: ≤ DistanceSupport_width: ≤ 14mm The stop_height shall be set to the thickness of the aligning edge -1mm.e.g. if you have a 16mm wood plate, set the stop_height to 15mm. The file lists includes also:0mm distance file without support10mm distanc